Location of Repository

Author manuscript, published in "Ferroelectrics 353 (2006) 104" Ferroelectric PbTiO3 films grown by pulsed liquid injection metalorganic chemical vapour deposition

By A. Bartasyte, A. Abrutis, C. Jimenez, F. Weiss, O. Chaix-pluchery and Z. Saltyte

Abstract

Abstract: The influence of various deposition conditions (deposition temperature, partial oxygen pressure and solution composition) to the growth of ferroelectric PbTiO3 (PTO) films by pulsed liquid injection metalorganic chemical vapour deposition (MOCVD) was examined. Films were grown on LaAlO3 (001), SrTiO3 (001) and sapphire (R-plane) substrates. Pb(thd)2 and Ti(O i Pr)2(thd)2 (thd = 2,2,6,6-tetramethyl-3,5-heptanedionate) dissolved in toluene were used as precursors. The evolution of film composition, surface morphology and microstructure with deposition conditions was studied. The film microstructure was characterized by X-ray diffraction (XRD) in Bragg-Brentano and Schulz geometries and by Raman spectroscopy. Epitaxial films on perovskite substrates consisted of dominant c-axis and minor a-axis textured zones (c-domains and a-domains). The amount of a-domains in films depended mainly on deposition temperature. The twinning in a- and c-domains was observed and twinning (tilt) angles depended on deposition conditions and substrate. Fully twinned or partially twinned films were obtained in varying deposition conditions. The best quality epitaxial films were obtained on SrTiO3 and LaAlO3 at 650 °C. Films on sapphire were mainly polycrystalline

Topics: liquid injection MOCVD, PbTiO3 films, twinning
Year: 2008
OAI identifier: oai:CiteSeerX.psu:10.1.1.371.6947
Provided by: CiteSeerX
Download PDF:
Sorry, we are unable to provide the full text but you may find it at the following location(s):
  • http://citeseerx.ist.psu.edu/v... (external link)
  • http://hal.archives-ouvertes.f... (external link)
  • Suggested articles


    To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.