Article thumbnail

Identification of plastic constitutive parameters at large deformations from three dimensional displacement elds

By Marco ROSSI and Fabrice PIERRON

Abstract

The aim of this paper is to provide a general procedure to extract the constitutive parameters of a plasticity model starting from displacement measurements and using the Virtual Fields Method. This is a classical inverse problem which has been already investigated in the literature, however several new features are developed here. First of all the procedure applies to a general three-dimensional displacement eld which leads to large plastic deformations, no assumptions are made such as plane stress or plane strain although only pressure-independent plasticity is considered. Moreover the equilibrium equation is written in terms of the deviatoric stress tensor that can be directly computed from the strain eld without iterations. Thanks to this, the identi cation routine is much faster compared to other inverse methods such as nite element updating. The proposed method can be a valid tool to study complex phenomena which involve severe plastic deformation and where the state of stress is completely triaxial, e.g. strain localization or necking occurrence. The procedure has been validated using a three dimensional displacement eld obtained from a simulated experiment. The main potentialities as well as a rst sensitivity study on the inuence of measurement errors are illustrated

Topics: Constitutive modelling, Inelastic and nite deformation, Inverse methods, Numerical algorithms, Sciences de l'ingénieur: Mécanique
Publisher: 'Springer Science and Business Media LLC'
Year: 2012
DOI identifier: 10.1007/s00466-011-0627-0
OAI identifier: oai:sam.ensam.eu:10985/6524

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.

Suggested articles

Citations

  1. (2007). 3D strain eld measurement by correlation of volume images using scattered light: recording of images and choice of marks.
  2. (1993). A general anisotropic yield criterion using bounds and a transformation weighting tensor.
  3. (1996). A method of generating analytical yield surfaces of crystalline materials.
  4. (2009). A new characterisation method for rubber.
  5. (2008). A new experimental technique for the multi-axial testing of advanced high strength steel sheets.
  6. (2008). A new model of metal plasticity and fracture with pressure and Lode dependence.
  7. (2006). A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states.
  8. (1991). A six-component yield function for anisotropic materials.
  9. (1948). A theory of the yielding and plastic of anisotropic metals.
  10. (2004). A threedimensional digital image correlation technique for strain measurements in microstructures.
  11. (2009). An iterative procedure for determining eective stress-strain curves of sheet metals.
  12. (2006). Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardening.
  13. (2008). Application of digital image correlation to the study of planar anisotropy of sheet metals at large strains.
  14. (2006). Applying the virtual method to the identi of elasto-plastic constitutive parameters.
  15. (2005). Calibration and evaluation of seven fracture models.
  16. (2004). Characterisation of materials subjected to large strains by inverse modelling based on in-plane displacement
  17. (2010). Characterization of aluminum alloys using a 3D full measurement. In:
  18. (1995). Constitutive modelling for granular media using an anisotropic distortional yield model.
  19. (2011). Constrained Nonlinear Optimization Algorithm
  20. (1981). Derivation of the tensile stress-strain curve from bending data.
  21. (1998). Determination of the elastoplastic properties of aluminium using a mixed numericalexperimental method.
  22. (2002). Digital volume correlation including rotational degrees of freedom during minimization.
  23. (1999). Digital volume correlation: Three-dimensional strain mapping using X-ray tomography.
  24. (2007). Directional distortional hardening in metal plasticity within thermodynamics.
  25. (2008). Elasticity and plasticity of large deofrmations, an introduction. Springer-Verlag
  26. (2007). Elasto-plastic material parameter identi by inverse methods: calculation of the sensitivity matrix.
  27. (2008). Elastoplastic behavior identi for heterogeneous loadings and materials.
  28. (2000). Evaluation of a material parameter extraction algorithm using MRI-based displacement measurements.
  29. (2007). Evaluation of tubular materials by a hydraulic bulge test.
  30. (2009). Flow stress evaluation of zinc copper and carbon steel tubes by hydraulic bulge tests considering their anisotropy.
  31. (2007). General framework for the identi of constitutive parameters from full- measurements in linear elasticity.
  32. (1990). General least-squares smoothing and differentiation by the convolution (Savitzky-Golay) method.
  33. (2008). Identi of elasto-visco-plastic parameters and characterization of l uders behavior using digital image correlation and the virtual method.
  34. (2008). Measurement of the dynamic shear modulus of mouse brain tissue in-vivo by magnetic resonance elastography.
  35. (1993). Necking in tensile bars with rectangular cross-section.
  36. (1950). New criteria for predicting the press performance of deep drawing sheets. Trans Am Soc Metals 42:1197{1232
  37. (2001). Nonlinear kinematic hardening identi for anisotropic sheet metals with bending-unbending tests.
  38. (1994). Numerical analysis of the stressstrain curve and fracture initiation for ductile material.
  39. (1952). On discontinuous plastic states, with special reference to localized necking in thin sheets.
  40. (2007). On linear transformations of stress tensors for the description of plastic anisotropy.
  41. (1998). On the noninvasive determination of material parameters from a knowledge of elastic displacements: theory and numerical simulation.
  42. (2006). Orthotropic yield criterion for hexagonal closed packed metals.
  43. (2008). Overview of identi methods of mechanical parameters based on full- measurements.
  44. (1980). Plastic instabilities and uniaxial tensile ductilities.
  45. (1987). Practical Methods of Optimization.
  46. (2004). Sensitivity of the virtual method to noisy data.
  47. (1964). Smoothing and dierentiation of data by simpli least squares procedures.
  48. (2008). Stress reconstruction and constitutive parameter identi in plane-stress elasto-plastic problems using surface measurements of deformation
  49. (2000). Tekkaya A
  50. (2004). The element method for threedimensional thermomechanical applications.
  51. (2006). The element method.
  52. (1994). The identi of parameters for visco-plastic models via methods and gradient methods.
  53. (2010). The Tran V
  54. (2006). The virtual method for extracting constitutive parameters from full- measurements: a review.
  55. (2007). Three-dimensional full- measurements of large deformations in soft materials using confocal microscopy and digital volume correlation.
  56. (2008). Threedimensional image correlation from X-ray computed tomography of solid foam.
  57. (2004). Tourabi A
  58. (2010). Towards high performance digital volume correlation. Exp Mech.
  59. (2010). Ultra high speed DIC and virtual method analysis of a three point bending impact test on an aluminium bar. Exp Mech.
  60. (1996). Uniaxial true stress-strain after necking.