Time-integrating radon gas measurements in domestic premises: comparison of short-, medium- and long-term exposures

Abstract

To identify the most applicable technology for the short-term assessment of domestic radon levels, comparative assessments of a number of integrating detector types, including track-etch, electret and activated charcoal were undertaken. Thirty-four unremediated dwellings in a high-radon area were monitored using track-etch detectors exposed for one-month and three-month periods. In parallel, one-week measurements were made in the same homes at one-month intervals, using co-located track-etch, charcoal and electret detectors exposed simultaneously, while three of the homes were also monitored by continuous-sampling detectors at hourly intervals over extended periods. Calibration of dose-integrating devices against each other and against continuous-monitoring systems confirmed good responsivity and linearity. Although track-etch, charcoal and electret devices are suitable in principle for one-week measurements, zero-exposure offset and natural radon variability cause many one-week results to be equivocal, necessitating repetition of the measurement. One-week exposures can be reliable indicators in low-radon areas or for new properties, but in high-radon areas, the use of three-month exposures is indicated. This analysis also established confidence limits for short-term measurements

Similar works

Full text

thumbnail-image

Kingston University Research Repository

redirect
Last time updated on 11/04/2012

This paper was published in Kingston University Research Repository.

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.