Skip to main content
Article thumbnail
Location of Repository

Optimisation of wireless communication system by exploitation of channel diversity

By K Iqbal


Communication systems are susceptible to degradation in performance because of interference received through their side lobes. The interference may be deliberate electronic counter measure (ECM), Accidental RF Interference (RFI) or natural noise. The growth of interference communication systems have given rise to different algorithms, Adaptive array techniques offer a possible solution to this problem of interference received through side lobes because of their automatic null steering in both spatial and frequency domains. Key requirement for space-time architecture is to use robust adaptive algorithms to ensure reliable operation of the smart antenna. Space division multiple access (SDMA) involves the use of adaptive nulling to allow two or more users (mobiles) in the same cell to share same frequency and time slot. One beam is formed for each user with nulls in the direction of other users. Different approaches have been used to identify the interferer from desired user. Thus a basic model for determining the angle of arrival of incoming signals, an appropriate antenna beam forming and adaptive algorithms are used for array processing. There is an insatiable demand for capacity in wireless data networks and cellular radio communication systems. However the RF environment that these systems operate in is harsh and severely limits the capacity of traditional digital wireless networks. With normal wireless systems this limits the data rate in cellular radio environments to approximately 200 kbps whereas much higher data rates in excess of 25Mbps are required. A common wireless channel problem is that of frequency selective multi-path fading. To combat this problem, new types of wireless interface are being developed which utilise space, time and frequency diversity to provide increasing resilience to the channel imperfections. At any instant in time, the channel conditions may be such that one or more of these diversity methods may offer a superior performance to the other diversity methods. The overall aim of the research is to develop new systems that use a novel combination of smart antenna MIMO techniques and an advanced communication system based on advanced system configuration that could be exploited by IEEE 802.20 user specification approach for broadband wireless networking. The new system combines the Multi-input Multi-output communication system with frequency diversity in the form of an OFDM modulator. The benefits of each approach are examined under similar channel conditions and results presented

Publisher: Department of Informatics and Sensors
Year: 2009
OAI identifier:
Provided by: Cranfield CERES

Suggested articles


  1. (2004). Application note on “Channel estimation for WCDMA Rake Receiver”, doi
  2. (2007). Channel estimation in MIMO OFDM system by tracking the delay-subspace”, doi
  3. (2003). Fast antenna selection algorithms for MIMO systems’’, doi
  4. (2004). MIMO systems with antenna selection’’, IEEE microwave magazine, doi
  5. MIMO-OFDM for wireless communications: Signal detection with enhanced channel estimation’’, doi
  6. (2002). Totally Blind channel estimation for OFDM over fast varying mobile channels’’, doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.