Skip to main content
Article thumbnail
Location of Repository

The simulation, fabrication and testing of widely tunable micromachined capacitors

By Andrew Gallant
Topics: Learning disabilities Counseling of. Learning disabled youth Counseling of.
Year: 2005
OAI identifier: oai:etheses.dur.ac.uk:1771
Provided by: Durham e-Theses

Suggested articles

Citations

  1. 11MEMS micromirrors reflecting the big picture in home theater", Small Times, http: //www. smal ftimes. com/document display. c fTn? doc ument id=44221.
  2. (2001). 185 [18] "Epson using MEMS to create advance inkjet heads for POS printers-.
  3. A 1.3 GHz low-phase noise fully tunable CMOS LC VCO", doi
  4. A computer-aided design system for microelectromechanical systems (MEMCAD)", doi
  5. (2002). A high Q, large tuning range, tunable capacitor for RF applications", doi
  6. (2003). A hybrid approach to low-,, oltage MEMS switches", doi
  7. (1997). A micro variable inductor chip using MlAlS relays", Transducers 97, doi
  8. (2003). A new class of tunable RF MEMS inductors", doi
  9. (1999). A new fabrication method for high-Q on-chip spiral inductor", Micromachined Devices and Components V, doi
  10. A new organic modifier for anti-stiction-, doi
  11. A new sacrificial layer process for the fabrication of micromechanical systems", doi
  12. A sticking model of suspended polysilicon microstructure including residual stress gradient and postrelease temperature", doi
  13. Acoustic wave properties of CVD diamond", doi
  14. Advanced photoresist technologies for micros,. ý, stems".
  15. Agfa millimask photoernulsion plates", AV`a-GevaertN. 1', Septestraal 27, B-2640
  16. Alkene based monolayer films as anti-stiction coatings for polysilicon MENIS", doi
  17. Box 9106,
  18. Characteristics of an area-variable varactor diode", doi
  19. (1995). Characterization of SAW devices up to 2.6 GHz on GaAs and InP", doi
  20. Comb-drive actuators for large displacements", doi
  21. Comparative evaluation of drying techniques for surface micromachining", doi
  22. Continuous antistiction coatings using self-assembled monolayers, for gold microstructures". doi
  23. D ich lorodimethyl si lane as an anti-stiction monolayer for MEMS: A comparison to the 191 octadecyltrichlosilane self-assembled monolayer", doi
  24. Dendritic material as a dry-release sacrificial layer", doi
  25. Design and modeling of a micromachined high-Q tunable capacitor with large tuning range and a vertical planar spiral inductor", doi
  26. Determination of Young's modulus of electroplated nickel", doi
  27. (1999). Development and experimental analysis of a micromachined resonant gyroscope",
  28. (2000). Development of a -wide tuning range MEMS tunable capacitor for wireless communication systems". doi
  29. (2003). DMD reliability: a MEMS success story", doi
  30. Dr-\ release for surface micromachining with HF vapor-phase etching", doi
  31. Dry release of metal structures in ox, ý gen plasma: process characterization and optimization", doi
  32. Drying cells for SEM, AFM and TEM by hexamethyldisilazane: A study on hepatic endothelial cells", doi
  33. Effects of Elevated-Temperature Treatments in Microstructure Release Procedures", doi
  34. (2003). Electro/thermal measurements of RF MEMS capacitive switches", doi
  35. (1970). Electromagnetic fields and waves", 2nd edition
  36. Electrostatic curved electrode actuators", doi
  37. Elimination of extra spring effect at the set-up anchor of surface-machined structure", doi
  38. (2002). Enhancement of quality factor in RF-MEMS spiral inductors by etching out substrate", doi
  39. Etch rates for micromachining processing", doi
  40. Fabrication, RF characteristics and mechanical stability of self- assembled 3D microwave inductors", Sensors andActuators A-Physical, doi
  41. GaAs HEMT monolithic voltage-controlled oscillators at 20 and 30 GHz incorporating Schottky-varactor frequency tuning", doi
  42. GaAs pHEMT-based technology for microwave applications in a volume `1, %IIC production environment on 150-mm wafers",
  43. High-performance inductors using capillary based fluidic self- assembly", doi
  44. (2002). High-Q FBAR filters in a wafer-level chip-scale package", doi
  45. Inline capacitive and DC-contact MEMS shunt switches". doi
  46. Integrated Suite of MEMS Design Tools",
  47. Lifetime characterization of capacitive RF MEMS switches", doi
  48. Low-actuation voltage RF MEMS shunt switch with cold switching lifetime of seven billion cycles", doi
  49. (2003). MEMS near-DC to RF capacitive series switches", doi
  50. (2001). MEMS single-pole double-throw (SPDT) X and K-Band switching circuits", doi
  51. (2004). MEMS tunable capacitors and switches for RF applications", doi
  52. Micro-discharge and electric breakdown in a micro-gap doi
  53. (2002). Micro-electromechanical variable capacitors for RF applications", doi
  54. Microelectromechanical capacitor with wide tuning range", doi
  55. Microelectromechanical capacitors for RF applications", doi
  56. Micromachined low-loss microwave switches", doi
  57. (1991). Micromachined microwave actuator (MINIAC) technology-a new tuning approach for microwave integrated circuits", doi
  58. (2001). Micromachined RF MEMS tunable capacitors using piezoelectric actuators", doi
  59. (1997). Micromachined varactor with wide tuning range", doi
  60. Micromechanical membrane switches on silicon", doi
  61. Monolithic fabrication of electroplated solenoid inductors using three- dimensional photolithography of a thick photoresist", doi
  62. (2001). Motorola MEMS switch technology for high frequency applications", Microelectromechanical Vstems Conference, doi
  63. Neutronex 309 gold electroplating solution",
  64. (1995). NIEMS commercialization activities at MCNC", doi
  65. On-chip spiral inductors with patterned ground shields for Sibased RF IC's", doi
  66. PHEMT MMIC product family", Filtronic Compound Semiconductors Lid, hllp: //www. filcs. coMýproducts switches index.
  67. (1975). Photoresist materials and processes",
  68. Polyimide based GaAs micromachined millimeter wave structures", doi
  69. (2003). Power handling and linearity of MEM capacitive series switches", doi
  70. Process yields for laser repair of aged, stiction-failed, MEMS devices", doi
  71. Reconfigurable double-stub tuners using MEMS switches for intelligent RF front-ends", doi
  72. Review of radio frequency microelectromechanical systems technology", doi
  73. (2001). RF high-Q spiral inductor design", doi
  74. (2003). RF MEMS devices", doi
  75. RF MEMS from a device perspective", doi
  76. (2002). RF MEMS switches and applications (INVITED)", doi
  77. (2002). RF MEMS switches for 3D-IC phased array antenna modules",
  78. RF MEMS switches with enhanced powerhandling capabilities", doi
  79. RF MEMS the next killer application", mstnews,
  80. RF MEMS tunable capacitors with large tuning ratio", 17th IEEE International Cot? lerence on Micro Electro Mechanical Systems, doi
  81. (1998). RF micromachined varactors with wide tuning range", doi
  82. Self-assembled monolaýers as anti-stiction coatings for MEMS: characteristics and recent developments", doi
  83. (2002). Self-assembled out-of-plane high-Q integrated inductors", doi
  84. Stiction of Surface Micromachined Structures after Rinsing and Drying - Model and Investigation of Adhesion Mechanisms", doi
  85. (1996). Study of contacts in an electrostatically actuated microswitch", doi
  86. Supercritical carbon dioxide extraction of solvent from micromachined structures", doi
  87. (1992). Surface Micromachining", doi
  88. Surface processes in MEMS technology", doi
  89. The design, simulation and fabrication of microengineered silicon gyroscopes",
  90. (1997). The fundamentals of microfabrication",
  91. The prediction of stiction failures in MEMS". doi
  92. The realization and design considerations of a flip-chip integrated MEMS tunable capacitor", doi
  93. (2001). Thin film bulk wave acoustic resonators (FBAR) for wireless applications-. doi
  94. (2002). variable capacitors for tunable filters", doi
  95. (2003). Very wide tuning range micro-electromechanical capacitors in the MUMPs process for RF applications", doi
  96. VHF free-free beam high-Q micromechanical resonators", doi
  97. Wafer level anti-stiction coatings for MEMS", doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.