DOI: 10.1051/jp4:20031080 Pickling of laser-cut NiTi slotted tube stents: Effect on surface morphology, dimension changes and mechanical behaviour

Abstract

Abstract: Production of the NiTi slotted tube stents by laser cutting leads to strong burr formation and depositions on the material surface. Acid pickling is one of the major methods to remove the burr and the depositions. In this study, as a pre-treatment of polishing the NiTi stents, pickling was tested for various times in an acid solution at room temperature. Its effect on the surface morphology, dimension changes, and mechanical behaviour of the NiTi stents was evaluated. The burr and depositions could be removed practically. The removal (weight loss) of the material increases linearly with the pickling time. The burr and depositions were removed totally from the cutting zone when pickling time reached a specific value. Experimental relations among weight loss, dimensions, mechanical properties and pickling time of the NiTi stents were established. Keywords: NiTi stents; Acid pickling. 1

Similar works

Full text

thumbnail-image
oai:CiteSeerX.psu:10.1.1.924.6325Last time updated on 11/1/2017

This paper was published in CiteSeerX.

Having an issue?

Is data on this page outdated, violates copyrights or anything else? Report the problem now and we will take corresponding actions after reviewing your request.